TOMORROW’S TECHNOLOGY for today’s challenges!

AMT Group Australasia is the exclusive agent of the TD 100CE and the Complete Care Range to Australian and New Zealand. 

 

The TD 100CE delivers high level disinfection to TOE probes in ONLY 5 minutes. The TD 100CE disinfects each TOE probe with high-level disinfectant and provides printed verification upon completion of successful disinfection cycle. The TD 100CE dramatically reduces the amount of stress and the potential for damage to TOE probes.

 

Our single-use high-level disinfectants provide several advantages over reusable products based on the same chemistries found in other automated disinfectors. These advantages lie in the assurance of a proven effective concentration each time they are used, and in the value derived from single-use.

 

The TOE Complete Care is a start to finish re-processing process, equipped with all accessories needed to assure high-level disinfection with reliable print verification and training for staff. The Complete Care process improves quality, reduces variations in the disinfection process, controls costs and reduces the risk of infections associated with medical equipment, devices and suppliers.



CHANGING HOW HOSPITALS DISINFECT TOE PROBES

Fast & Easy to Use

The TD 100CE automatically processes high-level disinfection followed by 5 cold water rinses for a total of 17 minutes of TOE probe total reprocess time. 

 

Protects Your Probes

The TD 100CE dramatically reduces the amount of stress and the potential for damage to TOE probes, every aspect of the TOE probe taken into consideration in the design.

Protects Your Staff

The TD 100CE provides unsurpassed operator safety from exposure to high-level disinfectant vapours, through advanced vapour management filtration system that adsorbs and neutralizes vapours released during the high-level disinfection process. 

 

Printed Verification

The TD 100CE performs continuous self-diagnostic tests that confirm the result in a printed report after each cycle.


EFFECTIVE REPROCESSING

TOE COMPLETE CARE 10 EASY STEPS

  • Step # 1

    Point of Use Cleaning (TEEZyme™ Enzymatic Sponge)

  • Step # 2

    TOE Probe Transportation Case (TPorter™ Transportation Case - soiled probe)

  • Step # 3

    Enzymatic Cleaning (Medizime LF Enzymatic Cleaner)

  • Step # 4

    Rinse and Dry Probe (QwikDry™ TOE Probe Drying Cloth)

  • Step # 5

    Electrical Leak Testing (Ultrasound Leakage Tester)

  • Step # 6

    High-Level Disinfection (TD100 CE Automated TOE Probe Disinfector)

  • Step # 7

    Rinsing After High-Level Disinfection (Nephros Water Filter)

  • Step # 8

    Probe Drying (QwikDry™ TOE Probe Drying Cloth)

  • Step # 9

    HEPA Filtered Probe Storage (CleanShield™ TOE Probe Storage Cabinet)

  • Step # 10

    TOE Probe Transportation Case (TPorter™ Transportation Case - clean probe)

 

 

Enquiries

For any enquires please fill out the form below, and one of our trained technicians will be in contact as soon as possible.